The G80 chain is sturdy and wear-resistant during use, but improper operation can still cause the G80 chain to break, which is called strong cracking. Below is a brief introduction to it.
The concept of strong cracking and fatigue cracking of G80 chains is not the same. Strong cracking refers to the situation where the G80 chain is subjected to strong impact and forcibly pulled apart. This type of chain breakage can be avoided as long as we operate the chain correctly and ensure that there are no dangerous objects in the surrounding environment. Strong cracking of the chain can be effectively avoided.
The strong cracking of the G80 chain is caused by operational errors, and we should try our best to avoid it in order to extend the service life of the chain. As long as we use standards and operate correctly, we can maximize the power of the G80 chain.
Long term use of the chain may cause certain changes in its appearance, such as deformation, twisting, and wear. If the chain is twisted, it should be dealt with in a timely manner to reduce the occurrence of operational hazards.
The twisting of the lifting chain often occurs, which can have an impact on operational safety. Users should have a detailed understanding before taking appropriate action.
If the degree of distortion is relatively light, the user can continue with the lifting work, but it is necessary to check the chain and understand the development of distortion. If the danger cannot be ruled out, it should be strictly prohibited from use.
80 level chains often fail due to wear and tear during use, which is a very common problem. Can this operation reduce the degree of wear and tear? It's actually quite simple, just two moves are needed.
The first move; Before using an 80 level lifting chain for operation, apply a thin layer of lubricating oil evenly on its surface and let it stand for a period of time. After the grease is fully absorbed, use it again to reduce its wear and tear.
Second trick: Choose a suitable chain according to actual needs for operation. In addition, if there is any abnormal operation during use, please stop the operation in a timely manner and inspect the chain. This can achieve the goal of reducing its wear and tear.
